Because amateurs can broadcast from anywhere in the world it becomes too confusing if everyone uses local time. Instead, a common time called Coordinated Universal Time (UTC) is used. This time is somewhat based on the standard time of London, England also known as Greenwich Mean Time (GMT).
In the eastern time zone, you add 5 hours* to EST (Eastern Standard Time) to get UTC. So if it is 12 noon locally, then the time is 1700 UTC. However, if it is daylight savings time then you add only 4 hours. Here is a table of some times that might help to sort out UTC.
|
EST |
24
Hour |
Date |
UTC |
UTC
Date |
|
8:00 AM |
0800 |
April 1 |
1300 |
April 1 |
|
12:00 AM |
1200 |
April 1 |
1700 |
April 1 |
|
6:00 PM |
1800 |
April 1 |
2300 |
April 1 |
|
7:00 PM |
1900 |
April 1 |
0000 |
April 2 |
|
9:00 PM |
2100 |
April 1 |
0100 |
April 2 |
Coordinated Universal Time (UTC)
|
|
|
What is Universal Time? |
![]()
The times of various events, particularly
astronomical and weather phenomena, are often given in "Universal
Time" (abbreviated UT) which is sometimes referred to, now
colloquially, as "Greenwich Mean Time" (abbreviated GMT).
The two terms are often used loosely to refer to time kept on the Greenwich
meridian (longitude zero), five hours ahead of Eastern Standard Time. Times
given in UT are almost always given in terms of a 24-hour clock. Thus, 14:42
(often written simply 1442) is 2:42 p.m., and 21:17 (2117) is 9:17 p.m.
Sometimes a Z is appended to a time to indicate UT, as in 0935Z.
When a precision of one second or better
is needed, however, it is necessary to be more specific about the exact meaning
of UT. For that purpose different designations of Universal Time have been
adopted. In astronomical and navigational usage, UT often refers to a specific
time called UT1, which is a measure of the rotation angle of the Earth as
observed astronomically. It is affected by small variations in the rotation of
the Earth, and can differ slightly from the civil time on the Greenwich
meridian. Times which may be labeled "Universal Time" or
"UT" in data provided by the Astronomical Applications Department of
the U.S. Naval Observatory (for example, in the annual almanacs) conform to this
definition.
However, in the most common civil usage,
UT refers to a time scale called "Coordinated Universal Time"
(abbreviated UTC), which is the basis for the worldwide system
of civil time. This time scale is kept by time laboratories around the world,
including the U.S. Naval Observatory, and is determined using highly precise
atomic clocks. The International Bureau of Weights and Measures makes use of
data from the timing laboratories to provide the international standard UTC
which is accurate to approximately a nanosecond (billionth of a second) per day.
The length of a UTC second is defined in terms of an atomic transition of the
element cesium under specific conditions, and is not directly related to any
astronomical phenomena.
UTC is the time distributed by standard
radio stations that broadcast time, such as WWV and WWVH. It can also be
obtained readily from the Global Positioning System (GPS) satellites. The
difference between UTC and UT1 is made available electronically and broadcast so
that navigators can obtain UT1. UTC is the basis for civil standard time in the
U.S. and its territories. Standard time within U.S.
time zones is an integral number of hours offset from UTC.
UTC is equivalent to the civil time for
Iceland, Liberia, Morocco, Senegal, Ghana, Mali, Mauritania, and several other
countries. During the winter months, UTC is also the civil time scale for the
United Kingdom and Ireland.
One can think of UT1 as being a time
determined by the rotation of the Earth, over which we have no control, whereas
UTC is a human invention. It is relatively easy to manufacture highly precise
clocks that keep UTC, while the only "clock" keeping UT1 precisely is
the Earth itself. Nevertheless, it is desirable that our civil time scale not be
very different from the Earth's time, so, by international agreement, UTC is not
permitted to differ from UT1 by more than 0.9 second. When it appears that the
difference between the two kinds of time may approach this limit, a one-second
change called a "leap
second" is introduced into UTC. This occurs on average about once every
year to a year and a half.
For more information on time, time scales,
and accurate clocks, see the U.S. Naval Observatory Time
Service Department web pages. Related information can be found on the pages
of the National
Institute of Standards and Technology (NIST).
Greenwich Mean Time is a widely used
historical term, but one that has been used in several ways. Because of the
ambiguity, its use is no longer recommended in technical contexts.